Removing the harmonic pulley question
#11
#12
Join Date: Oct 2016
Location: St. Clair County, Michigan
Posts: 4,592
Received 1,189 Likes
on
850 Posts
This is by far the safest and easiest method for locking cranks position, while oil pan is on. It locks crank in place securely and safely, no chance of something breaking and causing serious injury. You remove rubber plug below starter, rotate crank until opening appears in flywheel, insert 19mm socket on 6" extention into hole and opening of flywheel, rotate slightly until it binds up...then remove crank bolt.
Plus, you don't have to remove anything off the front of the engine to gain access, everything is done from underneath.
The following users liked this post:
mollusc (09-14-2021)
Thread
Thread Starter
Forum
Replies
Last Post
Chrisinhouston
Discovery II
1
09-02-2015 03:34 PM