Rocker arm play - what is acceptable?
#21
Tick tick tick
I'm chasing an upper valvetrain tick that comes and goes.
The lifters and pushrods were replaced but the rocker assembly was reused and I doubt it was taken apart and cleaned...
I took out the lifters and cleaned them, all the pushrods look good so hopefully this rocker assembly rebuild will be the cure.
The lifters and pushrods were replaced but the rocker assembly was reused and I doubt it was taken apart and cleaned...
I took out the lifters and cleaned them, all the pushrods look good so hopefully this rocker assembly rebuild will be the cure.
Mainly, I decided to just live with it, after trying various oil weights. At least it doesn't sound like a diesel anymore. Our lifters should really eliminate any ticks caused by the valve trains.
Thread
Thread Starter
Forum
Replies
Last Post