Transfer Case replacement
#11
Awesome info guys... I love that you can get help here and not just get flamed.. much more civil then other forums.. and another question if I may anyone know the weight of the lt230 with the parking break drum on? basically I'm asking if two healthy guys can do a swap with out the use of a jack.
#12
Yeah, you should be able to.
Get some long 10mm x about 180mm bolts and cut the heads off, round the cut ends and fit them to the transmission to use as guide pins. You have to feed the high/low selector rod in to the yoke while fitting the transfer case so you may need 5 hands if you don't use guide pins.
Get some long 10mm x about 180mm bolts and cut the heads off, round the cut ends and fit them to the transmission to use as guide pins. You have to feed the high/low selector rod in to the yoke while fitting the transfer case so you may need 5 hands if you don't use guide pins.
#14
Thread
Thread Starter
Forum
Replies
Last Post
Rovertroubles
Discovery II
10
06-03-2015 04:45 PM