Vibratons...
Thread Starter
|
Three Wheeling
Joined: Jul 2011
Posts: 90
Likes: 1
From: North Carolina
Guys,
I think I have finally found the vibration problem. It is a bent front output shaft. I took it out and put it on a lathe, so we could see if it was bent. Sure enough, it is bent. Now, does anyone know where I can get a new one at (or used)?
Thanks, Jason
I think I have finally found the vibration problem. It is a bent front output shaft. I took it out and put it on a lathe, so we could see if it was bent. Sure enough, it is bent. Now, does anyone know where I can get a new one at (or used)?
Thanks, Jason
Super Moderator
Joined: Jan 2011
Posts: 16,322
Likes: 88
From: Savannah Georgia
Depending on where in NC, the pull a part in Columbia (home of the Gamecocks that got the chicken poop scared out of them by Vandy) has a 2001 D2 that went on the yard on 8/12. By now the radiator and alternator and the easy stuff will be gone. And some D1 foolish owner will spend a lot of time yanking out seats that a'int gonna fit.
