Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

Weird thing happening with 00 D2 / Keyless doesn't work after sitting at airport

Thread Tools
 
Search this Thread
 
  #1  
Old 07-20-2022 | 09:03 AM
nashvegas's Avatar
Thread Starter
|
Pro Wrench
Joined: Oct 2007
Posts: 1,969
Likes: 1,280
From: Pacific NW
Default Weird thing happening with 00 D2 / Keyless doesn't work after sitting at airport

Took my D2 to the airport and left it parked for 2 weeks in the parking garage while I was on a trip. Everything working normally when I left, locked the D2 with the key fob. Went away on my business.

When I returned, the key fob-- would not do anything and would not unlock the doors (red light blinks on key when pressing lock or unlock). I thought... crap... dead battery. But I had just last month gotten a new battery on the D2. And the key fob battery is good / new .. the little red light on the key illuminates when pressing buttons.

I unlocked door with my key in the door handle, interior lights came on (yay no dead battery!) , then I pressed the unlock button on the key fob when the door was open, the alarm fast blinking light turned off. I got in and drove away without issue and then in testing it the next morning, the key fob works perfectly thereafter. Lock, unlock, etc.

It's as if the Disco lost the connection to the key, or the BCU went into some super deep sleep mode. In all my years of D2 ownership this has never happened, and since it's a 5th (oops) car, it often sits for a month at a time in the garage without me touching it. Anyone have any ideas?
 

Last edited by nashvegas; 07-20-2022 at 09:11 AM.
  #2  
Old 07-20-2022 | 02:00 PM
Disco-2-V8-NL's Avatar
Three Wheeling
Joined: Feb 2021
Posts: 63
Likes: 10
Default

Could be caused by interference on the 433mhz frequency, i experienced the same with my p38 a decade ago. But i don’t know if the D2 also uses the 433Mhz frequency for the central locking to be honest 😊
 
  #3  
Old 07-20-2022 | 02:18 PM
Harvlr's Avatar
TReK
Joined: Sep 2020
Posts: 2,372
Likes: 569
From: British Columbia Canada
Default

Like Disco 2 says, my P38 also does that from time to time. I then just resync the fob and everything works again.
 
  #4  
Old 07-20-2022 | 03:45 PM
Discorama's Avatar
Recovery Vehicle
Joined: Jun 2018
Posts: 1,199
Likes: 486
From: CA
Default

This was most likely caused by interference as already noted (NAS models use 315MHz btw). I have the same problem on my driveway, sometimes I have to hold the fob as close as possible to the receiver (rear passenger windows). There are a lot of devices operating on 315Mhz like garage door openers, TPMS or alarm systems. It is dominant when several service trucks are parked in front of my house. I get decent range only when I am in the wilderness.
 

Last edited by Discorama; 07-20-2022 at 07:29 PM.
  #5  
Old 07-20-2022 | 08:07 PM
nashvegas's Avatar
Thread Starter
|
Pro Wrench
Joined: Oct 2007
Posts: 1,969
Likes: 1,280
From: Pacific NW
Default

Interesting, I would guess at an airport there's loads of interference .. ? Thank you all
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Popsickle
Discovery II
7
03-10-2013 08:39 PM
bigcraigman
Discovery II
15
08-16-2012 06:28 AM
Jo1175
Discovery II
4
12-09-2011 06:56 PM
Camdisco24
Discovery II
10
01-24-2011 07:35 PM
HollandandHolland120
General Range Rover Discussion - Archived
1
10-18-2007 06:49 PM



Quick Reply: Weird thing happening with 00 D2 / Keyless doesn't work after sitting at airport



All times are GMT -5. The time now is 05:51 AM.