I didn't take pictures like I should have, as my wife said, typical guy. I thought it had to be close since they are close to the injector harness and coil pack connectors. Thanks for all the help guys

 

You can search in the Electrical troubleshooting manual for the colors of the wires... Each wire has a color code and you can search for it in the manual. There is also a connector section with pictures of the connectors.

Your wires are green but you need also to check if the wires have a secondary color to include it in the color code.

 

I remember rebuilding my buddies rover and they where bolted to the back of the heads somehow.

 

Well they were both solid green and appeared to be grounds. I saw what y'all were talking about in the Atlantic British video. I put them on top of the coil pack bracket since they appeared to be coming out of that part of the harness by the connectors for the coil packs.

 

Same here. Top bolts of coil bracket. I have also used the bottom bolts at various times (simple because the loop in the wire helps me position them--have I mentioned, lately, that the location of our coils is an absurdity on the scale of sagging pants?!).