The machine shop removed the ground strap and bracket from the head and I want to check if you guys remember which holes they go in.

Also, there weren’t two bolts on the bottom of the engine hoist bracket, but should there be? Any idea what their torque spec is?

 

Fork bracket is to hold the plug for the CPS, goes on the outer bolt hole. ground strap goes on the inner top hole. Intake bolt specs should do for the torque spec.

 

Awesome, thanks! Any idea whether that hoist mount is missing two bolts?

 

Bolts go in top two holes from the factory, no bolts in lower holes.

 

OK and then last question - there's the one rouge bolt on the left-side head, top-right corner. Is that just an empty bolt? The machine shop probably removed it and then replaced it, but now that everything back there was touched, I don't trust my memory nor their ability to put things back where they removed them from.

 

Ok, harness fork in lower left, ground strap in upper left, harness strap (connect to the harness) with extra bolt in upper right - all on left head at the rear. Lower right hole looking that rear is empty.

 

Many many thanks 🙏🏼