2003 Amp needed! Please help XQK000030
#12
Typically water leak in by the quarter rear window and with time cause corrosion in the DSP cabling. Or that corrosion can occur anyway out of electric processes. What typically happens is that the power pin (+12V) in the main havy gauge connector will corrode until it loses contact or breaks when you try to pull the connector. I solved this by opening up the DSP and soldered a heavy wire onto the +12V PCB wire and routed a separate lead out that I spliced into the 12V wire. And then the sound was back. These DSP amps are hard to come by and expensive. But I guess sometimes the fix is easy at least if you are a DIY with some electronics proficiency and soldering skills.
Thread
Thread Starter
Forum
Replies
Last Post
ivossss
Retired - Private For Sale/Trade Classifieds
1
03-12-2011 01:52 PM
sean2k
General Range Rover Discussion - Archived
0
11-04-2010 03:52 PM