P38 suspension programming?
Thread Starter
|
Recovery Vehicle
Joined: Jul 2016
Posts: 949
Likes: 54
P38 suspension programming?
not new to Land Rovers but am ignorant of p38's. Im looking at a 2000, and have a question about the sellers claim. He claims to have replaced essentially the entire air system. compressor, bags, computer, etc. But says that he has yet to program it, and that doing so requires a windows equipped pc.
My disco 2 experience is limited to handheld based programming/code/data raeading. What windows based program and faults would he be referring to? Does the new suspension computer have to be synced to the other on board computers just like a discovery?
thanks.
My disco 2 experience is limited to handheld based programming/code/data raeading. What windows based program and faults would he be referring to? Does the new suspension computer have to be synced to the other on board computers just like a discovery?
thanks.
Recovery Vehicle
Joined: Nov 2017
Posts: 788
Likes: 295
From: Amherstburg Ontario
How to make a cable from was to laptop Range Rover P38a - Making The EAS Serial Cable
free software
http://www.rswsolutions.com/media/ra...2_10-20-08.zip
i found this info on another site and plan to use it as well. It seems some of the more expensive code readers that are Land Rover specific can clear and Check for faults as well. Not sure there worth the money if this works
free software
http://www.rswsolutions.com/media/ra...2_10-20-08.zip
i found this info on another site and plan to use it as well. It seems some of the more expensive code readers that are Land Rover specific can clear and Check for faults as well. Not sure there worth the money if this works
P38's are nice, but that HVAC panel is brutal lol. I had like 4-5 spares when I had my 97 4.6L HSE Vitesse in AA Yellow.
I'd love a Holland & Holland, another Vitesse, or a Trek Edition!
I'd love a Holland & Holland, another Vitesse, or a Trek Edition!
Recovery Vehicle
Joined: Nov 2017
Posts: 788
Likes: 295
From: Amherstburg Ontario
Well last night I used the program from above with a homemade cable and was able to reset the air suspension and clear all the codes. I’m very happy. No annoying beeping! And no lights! ��
Thread
Thread Starter
Forum
Replies
Last Post
rangeroverboi
General Range Rover Discussion - Archived
3
Jun 10, 2006 02:33 PM