'03 Disco aux fan replaced but not coming on with AC
Thread Starter
|
7th Gear
Joined: Jun 2017
Posts: 7
Likes: 0
'03 Disco aux fan replaced but not coming on with AC
Hey gang,
Replaced my seized aux fan (using the excellent write up I found here) and it kicked on at 212 as expected. However it's not coming on with the AC engaged. Temp rarely gets above 204, but my understanding was that it was supposed to run anytime the compressor was engaged. Any thoughts?
Thanks!
Thanks!
Recovery Vehicle
Joined: Jun 2012
Posts: 1,080
Likes: 57
From: Queens, NYC
What's the ambient temperature?
The ambient temp needs to be above 70 or 75ºF (I forget where exactly), and the A/C compressor needs to be engaged, for the fan to come on with the A/C. If the compressor is engaged, your ambient temperature sensor might be at fault.
The ambient temp needs to be above 70 or 75ºF (I forget where exactly), and the A/C compressor needs to be engaged, for the fan to come on with the A/C. If the compressor is engaged, your ambient temperature sensor might be at fault.
Thread Starter
|
7th Gear
Joined: Jun 2017
Posts: 7
Likes: 0
ambient temp was around 90 today, sorry for not including that. Will check sensor. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
bcolins
Discovery II
9
Oct 31, 2017 08:14 PM
bcolins
Discovery II
10
May 10, 2011 11:09 AM