2002 land rover discovery2/trans limp mode
#1
2002 land rover discovery2/trans limp mode
change pads on front with acrylic pads,later found out needed to use ceramic,but b/4changing to ceramic,it went into a limp mode 3rd gear with no changing gears,original startup normal in gears but after takeoff goes to 3rd,got a code p0722 indicating output shaft speed sensor,wondering if changed out,would that be the cure,anyone experienced this please advise.
Thread
Thread Starter
Forum
Replies
Last Post
2007brr
General Range Rover Discussion - Archived
2
04-10-2012 02:34 PM
Rickey_240
General Tech Help
7
04-02-2010 05:33 PM
xb70valkarye
Discovery II
6
02-02-2010 10:13 PM