anyone have a suggestion about a proper code reader for the Disco 2 ? In checking the comparison charts it seems that the Actron CP9180 at $229 is the same functionally as the AutoLink AL319 for about $60 on Fleabay. Is there a LR specific reader or would these do the job for general troubleshooting?

 

I have an Ultragauge for $60+ which provides live sensor data when driving (especially for monitoring coolant temps). It can also monitor and clear codes.


I have also the Nanocom for reading and programming projects. Personally, the Nanocom is the best bang-for-the-buck as it allows me the options for re-programming keys, revising BCU features, etc.