Disco II ABS modulator/brake bleed question
Thread Starter
|
4wd Low
Joined: Jun 2015
Posts: 12
Likes: 0
Disco II ABS modulator/brake bleed question
Hi All,
I just replaced the ABS shuttle valve switch in the ABS modulator of my 2001 Disco II. Question is: What is the next step to get my brake system back online? I lost about 2/3 quart of Dot 4 in the process and my modulator is probably close to empty at this point. I read the WARNING in red in the Disco II Workshop Manual and it says Testbook/T4 must be followed if the modulator has been removed; well that is not an option. I was just going to bleed the brake system on the four wheels. Recommendations?
I just replaced the ABS shuttle valve switch in the ABS modulator of my 2001 Disco II. Question is: What is the next step to get my brake system back online? I lost about 2/3 quart of Dot 4 in the process and my modulator is probably close to empty at this point. I read the WARNING in red in the Disco II Workshop Manual and it says Testbook/T4 must be followed if the modulator has been removed; well that is not an option. I was just going to bleed the brake system on the four wheels. Recommendations?
Thread
Thread Starter
Forum
Replies
Last Post