Land Rover Forums - Land Rover Enthusiast Forum

General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by: CARiD

Dll won't move

   
Old Jan 22, 2013 | 08:22 AM
Share
  #11  
Savannah Buzz's Avatar
Super Moderator
Joined: Jan 2011
Posts: 16,322
Likes: 88
From: Savannah Georgia
Default
The connectors (there are two) should both be checked. One sends signals from XYZ switch to tranny computer. The other sends signals from tranny computer to valves inside the transmission.
 
Reply
0
Old Jan 23, 2013 | 05:48 PM
Share
  #12  
Merritt87's Avatar
Thread Starter
|
Overlanding
Joined: Jan 2013
Posts: 19
Likes: 0
Default
Connection looks good.
 
Reply
0
Old Jan 24, 2013 | 09:48 AM
Share
  #13  
Merritt87's Avatar
Thread Starter
|
Overlanding
Joined: Jan 2013
Posts: 19
Likes: 0
Default
I can move the xyz switch and the M S lights go off but just come back on when I try to drive..
 
Reply
0
Old Jan 24, 2013 | 08:59 PM
Share
  #14  
Merritt87's Avatar
Thread Starter
|
Overlanding
Joined: Jan 2013
Posts: 19
Likes: 0
Default
Originally Posted by Savannah Buzz
The connectors (there are two) should both be checked. One sends signals from XYZ switch to tranny computer. The other sends signals from tranny computer to valves inside the transmission.
Should I get a new or used xyz switch?. I wanted to add in that when it first went into limp mode my wife was driving down our very bumpy white stone driveway..
 
Reply
0
Old Jan 25, 2013 | 12:31 AM
Share
  #15  
Savannah Buzz's Avatar
Super Moderator
Joined: Jan 2011
Posts: 16,322
Likes: 88
From: Savannah Georgia
Default
How about cleaning yours? It is a series of basic mechanical switches inside.
 
Attached Thumbnails Dll won't move-xyz-photo.jpg  
Reply
0
Old Jan 25, 2013 | 12:33 AM
Share
  #16  
Merritt87's Avatar
Thread Starter
|
Overlanding
Joined: Jan 2013
Posts: 19
Likes: 0
Default
Ill give it a shot.. Should I go ahead and try that in th morning?
 
Reply
0
Old Jan 25, 2013 | 12:40 AM
Share
  #17  
Savannah Buzz's Avatar
Super Moderator
Joined: Jan 2011
Posts: 16,322
Likes: 88
From: Savannah Georgia
Default
It would be the quickest and least expensive path. Valentine's Day is coming, one more reason for picking a man's pocket each year....
 
Reply
0
Old Jan 25, 2013 | 12:52 AM
Share
  #18  
Merritt87's Avatar
Thread Starter
|
Overlanding
Joined: Jan 2013
Posts: 19
Likes: 0
Default
Originally Posted by Savannah Buzz
It would be the quickest and least expensive path. Valentine's Day is coming, one more reason for picking a man's pocket each year....
Very true and good advice.. Hopefully I can get her rover back for her..
 
Reply
0
Old Jan 25, 2013 | 12:05 PM
Share
  #19  
Merritt87's Avatar
Thread Starter
|
Overlanding
Joined: Jan 2013
Posts: 19
Likes: 0
Default
Originally Posted by Savannah Buzz
How about cleaning yours? It is a series of basic mechanical switches inside.
I got the switch off and open it is really clean but on the very bottom it has a bit of corrosion and stain from a small amount of water that stood in it. What should I use to clean it?
 
Reply
0
Old Jan 25, 2013 | 05:20 PM
Share
  #20  
Merritt87's Avatar
Thread Starter
|
Overlanding
Joined: Jan 2013
Posts: 19
Likes: 0
Default
Well I cleaned it and put it back on and it still won't stay out of limp mode. But now the m s light up when I hit the brake before it was when I wold put it in drive.
 
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 03:00 PM.