General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Dll won't move

Thread Tools
 
Search this Thread
 
  #21  
Old 01-25-2013 | 08:27 PM
Savannah Buzz's Avatar
Super Moderator
Joined: Jan 2011
Posts: 16,322
Likes: 84
From: Savannah Georgia
Default

The contacts are arranged as four outputs, which follow a chart on the attached pages. You can read with a meter.

W = Blue & Purple = pin 36 of tranny computer = pin 9 of XYZ connector
X = Blue & Black = pin 8 of tranny computer = pin 10 of XYZ connector
Y = Blue & Green = pin 37 of tranny computer = pin 7 of XYZ connector
Z = Blue and White = pin 9 of tranny computer = pin 6 of xyz connector
 
Attached Files
File Type: pdf
d2 XYZ sw.pdf (642.3 KB, 168 views)
File Type: pdf
d2 xyz connector.pdf (422.1 KB, 168 views)
  #22  
Old 01-25-2013 | 08:43 PM
Merritt87's Avatar
Thread Starter
|
Overlanding
Joined: Jan 2013
Posts: 19
Likes: 0
Default

I'm a Lil lost. When I check outputs I should get 12v?
 
  #23  
Old 01-29-2013 | 10:31 PM
Merritt87's Avatar
Thread Starter
|
Overlanding
Joined: Jan 2013
Posts: 19
Likes: 0
Default

Well I'm going to send it to the shop ill get back and let y'all know what they find.
 
  #24  
Old 01-30-2013 | 12:52 AM
Savannah Buzz's Avatar
Super Moderator
Joined: Jan 2011
Posts: 16,322
Likes: 84
From: Savannah Georgia
Default

re; When I check outputs I should get 12v

yes, per the chart from the RAVE. Measure between pin and frame ground.
 
  #25  
Old 01-30-2013 | 01:38 PM
Merritt87's Avatar
Thread Starter
|
Overlanding
Joined: Jan 2013
Posts: 19
Likes: 0
Default

I have sent it to the shop. I hate to do that but I have lots of work coming up and don't have the time to mess with her. Ill get back with you about what they find.
 
  #26  
Old 02-08-2013 | 09:39 AM
Merritt87's Avatar
Thread Starter
|
Overlanding
Joined: Jan 2013
Posts: 19
Likes: 0
Default

Well they told me I need a new trany.. I don't know how it would go out over night when it's not being moved.. Landrover has been a nightmare for me.
 
  #27  
Old 02-15-2013 | 11:26 AM
saidrover's Avatar
Three Wheeling
Joined: Dec 2012
Posts: 61
Likes: 0
From: Portland OR
Default

Not sure about the tranny, but have you messed with the position of the xyz switch while changing gear lever positions. I recently had the MS and limp nightmare and at the end of it all the position of the xyz mounted to the tranny was my culprit. No more MS limp.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Smith CH
Discovery II
4
03-10-2015 08:24 PM
jad568
Freelander
14
04-15-2013 02:47 PM
mtrdrms
Retired - Private 'Wanted' Classifieds
0
01-03-2013 08:18 PM
Linda_Mn
Defender
2
07-28-2009 10:43 AM



Quick Reply: Dll won't move



All times are GMT -5. The time now is 07:10 AM.