Ecu voltage no start
Thread Starter
|
3rd Gear
Joined: Jan 2026
Posts: 3
Likes: 0
Ecu voltage no start
Hi I have td5 no power to ecu only 2.022v from fuse 1 in the engine bay put voltmeter to ecu and exactly the same voltage.
Earths are all find from ecu if I used jumper cable from main live to fuse 1 in the engine bay fuse box truck will start and run but trying to diagnose low voltage to ecu.
nano come will not connect to ecu because of voltage
battery voltage 12v everywhere else
thanks
Earths are all find from ecu if I used jumper cable from main live to fuse 1 in the engine bay fuse box truck will start and run but trying to diagnose low voltage to ecu.
nano come will not connect to ecu because of voltage
battery voltage 12v everywhere else
thanks
Thread
Thread Starter
Forum
Replies
Last Post
