When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I recently purchased a 1996 Land Rover Discovery with a 4.0L engine. When I got this Land Rover the engine had been removed and it was not running.
After I rebuilt the engine and got it re-installed I found one vacuum line without a place to go. I was able to get the engine running and starting fine but I have a large vacuum leak.
The missing line come off a T on the passenger side valve cover. One side of the T goes to the intake and I cannot locate where the other side of the T goes.
I have gone through my Haynes manual many times. I have googled it many times and still no luck. Any help would be greatly appreciated.