Hello newbie here...need help
Thread Starter
|
Three Wheeling
Joined: Jun 2016
Posts: 86
Likes: 6
Hello newbie here...need help
Hi,
I have a 2006 LR3 v6 and susp. amber light came on ...after diagnostic I had the shop replace the compressor with same model :hitachi and now light still on...now its red max speed 30mph and the truck does not sit right!: the rear end is way higher than front. They're telling me its a bad compressor so a new one will be installed tomorrow.
anything else could be wrong ?
the code remaining is C1A13-64 (pressure not decreasing)
btw: I purchased the new compressor myself on line at Miessler Automotive inc. where I purchased struts for our '07 RR in the past and been satisfied.
Thank you for your input.
I have a 2006 LR3 v6 and susp. amber light came on ...after diagnostic I had the shop replace the compressor with same model :hitachi and now light still on...now its red max speed 30mph and the truck does not sit right!: the rear end is way higher than front. They're telling me its a bad compressor so a new one will be installed tomorrow.
anything else could be wrong ?
the code remaining is C1A13-64 (pressure not decreasing)
btw: I purchased the new compressor myself on line at Miessler Automotive inc. where I purchased struts for our '07 RR in the past and been satisfied.
Thank you for your input.
Last edited by Roverrrgirl; Jun 8, 2016 at 04:21 PM.
Baja
Joined: Aug 2013
Posts: 6,891
Likes: 787
From: Huntington Beach CA
You should post in the LR3 section. I would try to restore calibration for ride height and see what it does. Does the shop have a LR specific code reader like Autologic? If not, you need to find a shop that does.
I'm in so cal and can help if you are near.
I'm in so cal and can help if you are near.
Hi,
I have a 2006 LR3 v6 and susp. amber light came on ...after diagnostic I had the shop replace the compressor with same model :hitachi and now light still on...now its red max speed 30mph and the truck does not sit right!: the rear end is way higher than front. They're telling me its a bad compressor so a new one will be installed tomorrow.
anything else could be wrong ?
the code remaining is C1A13-64 (pressure not decreasing)
btw: I purchased the new compressor myself on line at Miessler Automotive inc. where I purchased struts for our '07 RR in the past and been satisfied.
Thank you for your input.
I have a 2006 LR3 v6 and susp. amber light came on ...after diagnostic I had the shop replace the compressor with same model :hitachi and now light still on...now its red max speed 30mph and the truck does not sit right!: the rear end is way higher than front. They're telling me its a bad compressor so a new one will be installed tomorrow.
anything else could be wrong ?
the code remaining is C1A13-64 (pressure not decreasing)
btw: I purchased the new compressor myself on line at Miessler Automotive inc. where I purchased struts for our '07 RR in the past and been satisfied.
Thank you for your input.
Thread
Thread Starter
Forum
Replies
Last Post
peekay
General Range Rover Discussion - Archived
1
Feb 13, 2006 06:53 PM
