pieces parts
Thread Starter
|
Mudding
Joined: Nov 2016
Posts: 108
Likes: 0
From: Waynesboro, Va
pieces parts
Was wondering if anyone had the piece of plastic that went from the windshield/ screen and under the hood for a disco 2. The part that the wipers come out of. If not, anyone know where I can find one? asking for a friend hahahaha
Camel Trophy
Joined: May 2016
Posts: 3,969
Likes: 859
From: Britainistan, UK
Honestly your best bet is to try on eBay for a new manufactured windshield cowling #JAG100100 or #JAK000010PMA.
I badly need one so the windshield cowlings that I try to remove from scrap yard Discos are too far gone to be reused. They were badly cracked and weathered or the underside clips where broken off.
I badly need one so the windshield cowlings that I try to remove from scrap yard Discos are too far gone to be reused. They were badly cracked and weathered or the underside clips where broken off.
Last edited by JUKE179r; Apr 14, 2018 at 10:25 PM.
Thread Starter
|
Mudding
Joined: Nov 2016
Posts: 108
Likes: 0
From: Waynesboro, Va
yeah .. mine is beyond repair... although someone tryd lol.... I got new wiper blades and they don't seem to fit for half the windshield on both side.... so I thinking this might be the problem, ordered new arms from lucky 8 (duh) and I hope that might fix it... but was venturing on the cowl..after looking under that... I might need the wiper linkage too asap... never ending story hahaha just glad it's back on the road... guess I need to update that ... thanks for the info for the part #
You can get a fiberglass windshield cowl from overseas. It "might" last longer vs the OEM plastic one. I only know of one person that bought one & I haven't heard anything bad about it.
TReK
Joined: Jul 2017
Posts: 3,387
Likes: 488
I saw a good one 2 weeks ago at the Lynchburg Pick n Save.
I plan on going back soon.
I'm about 2 hrs from you. I'll let you know if I find one.
You may want to look on Roanoke's Pick n Save site too.
They had some D2's a few months ago, and is about an hour from you.
I plan on going back soon.
I'm about 2 hrs from you. I'll let you know if I find one.
You may want to look on Roanoke's Pick n Save site too.
They had some D2's a few months ago, and is about an hour from you.
Mudding
Joined: Apr 2018
Posts: 161
Likes: 39
From: Fort Collins, Co
new ones seem to run in the 200-300 dollar range...
https://www.lucky8llc.com/collection...indshield-cowl
I have needed one for a while, but just hav'nt bit the bullet yet...
Hope you have luck finding a used one in good condition..
Matt
https://www.lucky8llc.com/collection...indshield-cowl
I have needed one for a while, but just hav'nt bit the bullet yet...
Hope you have luck finding a used one in good condition..
Matt
Thread Starter
|
Mudding
Joined: Nov 2016
Posts: 108
Likes: 0
From: Waynesboro, Va
yeah SixPack I remember you're close... Lol haven't been on in a while but, I know I owe you a beer or six. I got new wiper blades for inspection and it passed...since it wasn't raining. The new blades don't seem to fit to the windshield at the bottom. this sucked really bad when it snowed last week since I had to literally sit up and look out of the top of the windshield to get home. I ordered new arms but, I noticed that when I move the cowl, the wiper arms moved too. Mine is cracked all to sh%$ and I'm thinking that, if I go in and do and overhaul of the wiper drive... I just as well replace the cowl.... since it will fall to pieces when I try to take it off
If you could keep your eyes peeled that would be great!! If you do see one message or call if you don't mind.... 54zero-21nine-9five72. My GF's daughter goes to school down that way and may be able to pick it up. Thanks!
If you could keep your eyes peeled that would be great!! If you do see one message or call if you don't mind.... 54zero-21nine-9five72. My GF's daughter goes to school down that way and may be able to pick it up. Thanks!
Thread Starter
|
Mudding
Joined: Nov 2016
Posts: 108
Likes: 0
From: Waynesboro, Va
trying to replace the roof on my house this summer lol...seems I like money pits ... if anyone sees one... I'll pre pay and everything but, $250 is a little extreme. maybe I should look at a 3-D printer and save all of us money lol
TReK
Joined: Jul 2017
Posts: 3,387
Likes: 488
yeah SixPack I remember you're close... Lol haven't been on in a while but, I know I owe you a beer or six. I got new wiper blades for inspection and it passed...since it wasn't raining. The new blades don't seem to fit to the windshield at the bottom. this sucked really bad when it snowed last week since I had to literally sit up and look out of the top of the windshield to get home. I ordered new arms but, I noticed that when I move the cowl, the wiper arms moved too. Mine is cracked all to sh%$ and I'm thinking that, if I go in and do and overhaul of the wiper drive... I just as well replace the cowl.... since it will fall to pieces when I try to take it off
If you could keep your eyes peeled that would be great!! If you do see one message or call if you don't mind.... 54zero-21nine-9five72. My GF's daughter goes to school down that way and may be able to pick it up. Thanks!
If you could keep your eyes peeled that would be great!! If you do see one message or call if you don't mind.... 54zero-21nine-9five72. My GF's daughter goes to school down that way and may be able to pick it up. Thanks!
Will do
Thread
Thread Starter
Forum
Replies
Last Post
Ankeneering
Retired - Private For Sale/Trade Classifieds
0
Oct 24, 2017 10:58 PM
