General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by: CARiD

Service engine Soon

Thread Tools
 
Search this Thread
 
  #1  
Old 12-18-2010 | 11:35 PM
MannyEJR's Avatar
Thread Starter
|
4th Gear
Joined: Dec 2010
Posts: 4
Likes: 0
Default Service engine Soon

hello. I'm new to this site but have found a lot of usefull info in it. I just added fluid to the T-Case and rear diff on my 02 Disco and after driving 18 miles and parking for 2 hours and turning the vehicle on the Service Engine Soon light came. BTW I added Lucas Oil. the disco has 88299 miles. there is no loss of power and not roughness on idle.
Thanks for before hand for any help.
 
  #2  
Old 12-19-2010 | 12:40 PM
Rovin4life's Avatar
TReK
Joined: Dec 2009
Posts: 2,243
Likes: 10
From: Albany, NY
Default

get the codes read and the vehicle diagnosed by a professional that actually knows land rovers. Not someone that claims to but thinks all land rovers are the same.
 
  #3  
Old 12-19-2010 | 04:40 PM
MannyEJR's Avatar
Thread Starter
|
4th Gear
Joined: Dec 2010
Posts: 4
Likes: 0
Default

I just got the code for it and they tell me is code P1400, I could not find it in the list of codes. Does anybody have any ide as to what this code pertaisn to?
 
  #4  
Old 12-20-2010 | 06:30 PM
MannyEJR's Avatar
Thread Starter
|
4th Gear
Joined: Dec 2010
Posts: 4
Likes: 0
Default wind noise

I have a 2002 Disco with 83000 miles. I get a lot of wind noise and wind coming thru the door gaskets. They look on pretty good shape but then the veihicle is drafty. Any odeas as to how to solve the issue or an aftermarket seal kits for all five doors?
 
  #5  
Old 12-22-2010 | 06:06 AM
Rovin4life's Avatar
TReK
Joined: Dec 2009
Posts: 2,243
Likes: 10
From: Albany, NY
Default

make sure they are not torn and the doors need to be readjusted.

pull on the window frames to see if they move alot.

are you sure its not a p0140
 
  #6  
Old 12-22-2010 | 06:41 AM
hilltoppersx's Avatar
Joined: May 2009
Posts: 5,763
Likes: 14
From: Westchester, NY
Default

use a different scanner. it can't read the land rover codes its an SAI code.
 
  #7  
Old 12-22-2010 | 08:41 PM
MannyEJR's Avatar
Thread Starter
|
4th Gear
Joined: Dec 2010
Posts: 4
Likes: 0
Default

Thank you.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mr_boondoggle
Freelander
1
01-02-2009 09:32 AM
AMANDAMC
Discovery II
17
09-23-2007 11:14 AM
hippo2002
Freelander
1
12-19-2005 01:31 AM
Woody Reems
General Tech Help
6
11-29-2005 06:08 PM
rinmud
Retired - Private For Sale/Trade Classifieds
1
10-01-2005 04:32 PM



Quick Reply: Service engine Soon



All times are GMT -5. The time now is 08:56 AM.