LR2 2011 3.2 hard to start when warm
Ok Ill do that , I will replace the spark plugs as well to finish all the basic service required.
Btw where do you get your part numbers from , there was a website that had an awesome EPC now its gone .
any links for a good EPC ?
Update : if you were following my other post you will find that i replaced almost the whole coolong system on the car , during this job i found many wires under the intake that were exposed, i fixed all these wires and i found that the maf sensor was not pushed correctly inside the air cleaner box , I lubricated the O ring and pushed it inside all the way , after doing that the issue was completely fixed , most probably it was the MAF .
Thread
Thread Starter
Forum
Replies
Last Post



