If those are your measurements, you are not on a level surface. Or the frame is twisted, body panels off, etc. Or possibly some folding of space cause by a local wormhole. But it seems your front is dropping. That can be one or both front struts leaking or the valve block up front. My front was dropping a good amount overnight. I rebuilt the valve block ($35 ebay kit for all three blocks) and it solved the issue. But now it leaks down again a little. I think in my case, the white old desiccant from the compressor drier worked into the block again and I need to clean it. I did just rebuild the compressor too, so that will take care of the desiccant issue going forward, less what powder is in the lines for a while.