Wondering if any sleuths here might be able to help me figure this out. I’ve replaced the following within the last 5000 miles - air suspension, front bearings, tie rods, all brakes and rotors, new tires, aligned and balanced and still I’m getting some shake when applying brakes down the highway.

I thought the rotors would’ve fixed it but there’s been no change. Re-greased the pins also when doing the brakes so it’s not that.

Any ideas?

 

Front lower control arms. Common issue. Easiest test is at low speed to simply tap the brakes, kinda hard, and if you feel a thump - there ya go.

 

No thump or anything unusual when tapping brakes