What did you do to your LR3 today?
#871
#872
#873
sweet, someone else has a Rover like yours! haha
my most recent one was saying enough to the lowered MPG. For about a month its been hanging around 11 with 75/25 city driving, and the idle/low speed driving would sputter time to time. Cleaned the TB, did a round of Seafoam induction cleaner and replaced the MAF for good measure. 2 tanks in and MPG jumped back up to usual levels
my most recent one was saying enough to the lowered MPG. For about a month its been hanging around 11 with 75/25 city driving, and the idle/low speed driving would sputter time to time. Cleaned the TB, did a round of Seafoam induction cleaner and replaced the MAF for good measure. 2 tanks in and MPG jumped back up to usual levels
#874
#875
Played around in some very deep snow and went Camping this weekend. The only things I broke were my telescopic camping shovel, and also my driver side blindspot mirror fell off. Lots of shovelling snow and winching took place. Tent became buried halfway due to lots of snow and wind last night. I was about an hour north of Eau Claire, in Wisconsin.
#876
Highly recommend from either SDO or 4x4overlander (uk vendor)
#877
The following users liked this post:
bbyer (03-10-2019)
#878
#879
Lack of music options with the factory stereo was giving me the ****s so i fitted this Android head unit yesterday, 7" touch screen, GPS, Wifi ,Bluetooth and 32gig storage.
Also added some power sockets to the back of the center console, 2 x 2.4amp USB and 2 x 12V cigi sockets.
Also added some power sockets to the back of the center console, 2 x 2.4amp USB and 2 x 12V cigi sockets.
I dig it I am getting all the bits together to bypass the factory amp and stereo all together. Would love to find a harness that plugged into the speaker wire harness at the amp output connection. So I don’t have to chop it up to install the aftermarket amp etc.
#880
Well over the past few weeks I’ve slowly been making some changes did the headlight clearing of the Amber lenses it wasn’t too bad it took me about 2 hours and I made the switch to 33x12.50’s with a 18x9 wheel with a 35mm offset. And a 1.25 Bora Spacer in the rear. To go with spacers on the front there will be more cutting as for now I’m digging the stance and will adjust as time continues. There’s been some cutting to the fender trim but it hasn’t been that much work. I did relocate the coolant lines and remove the shark fin protecting the lines. Here’s a few pics