Looking to borrow a coil/air SLABS programmer, NYC area
#1
Looking to borrow a coil/air SLABS programmer, NYC area
I still have rear air suspension on my '99 D2, and I have installed the D1 CDL shifter. I picked up a SLABS unit from a 2004 model but it must be set for rear coils because the air deflates when I lock the CDL and I can't reinflate it.
Does anyone in the NYC area have a programmer that will let me change that setting? I can come to you if it's within a sensible distance.
Does anyone in the NYC area have a programmer that will let me change that setting? I can come to you if it's within a sensible distance.
#9
The very generous Paul Grant allowed me the use of his HawkEye, which let me change the setting from coils to air springs.
However, because this SLABS has apparently never been used for sir springs it's not calibrated and the HawkEye can't do that. So I'm still looking for someone with a Nanocom. Supposedly that will allow me to do the rear suspension calibration.
However, because this SLABS has apparently never been used for sir springs it's not calibrated and the HawkEye can't do that. So I'm still looking for someone with a Nanocom. Supposedly that will allow me to do the rear suspension calibration.
Thread
Thread Starter
Forum
Replies
Last Post
99TEXASD2
Discovery II
0
11-07-2014 07:01 PM
fcienfuegos
Discovery II
0
02-17-2011 03:58 PM