P38 suspension programming?
#1
P38 suspension programming?
not new to Land Rovers but am ignorant of p38's. Im looking at a 2000, and have a question about the sellers claim. He claims to have replaced essentially the entire air system. compressor, bags, computer, etc. But says that he has yet to program it, and that doing so requires a windows equipped pc.
My disco 2 experience is limited to handheld based programming/code/data raeading. What windows based program and faults would he be referring to? Does the new suspension computer have to be synced to the other on board computers just like a discovery?
thanks.
My disco 2 experience is limited to handheld based programming/code/data raeading. What windows based program and faults would he be referring to? Does the new suspension computer have to be synced to the other on board computers just like a discovery?
thanks.
#2
How to make a cable from was to laptop Range Rover P38a - Making The EAS Serial Cable
free software
http://www.rswsolutions.com/media/ra...2_10-20-08.zip
i found this info on another site and plan to use it as well. It seems some of the more expensive code readers that are Land Rover specific can clear and Check for faults as well. Not sure there worth the money if this works
free software
http://www.rswsolutions.com/media/ra...2_10-20-08.zip
i found this info on another site and plan to use it as well. It seems some of the more expensive code readers that are Land Rover specific can clear and Check for faults as well. Not sure there worth the money if this works
#4
#5
Thread
Thread Starter
Forum
Replies
Last Post
rangeroverboi
General Range Rover Discussion - Archived
3
06-10-2006 02:33 PM