Cleaned my blower motor - where'd this stuff come from?
#5
#6
Pretty easy, took about 45 mins - used this as a guide. Just need a T20 torx bit for your screw driver. Just remember the blue plug unplugs away from you.
https://landroverforums.com/forum/di...llation-55530/
https://landroverforums.com/forum/di...llation-55530/
#8
The reason the leaves get in is failure of the filter that spans the air intake just under, and entirely across, the hood.
Go to Lowes or Home Depot and get a cut to fit filter (blue material, about an inch thick). Cutstrips, strips (I don't remember precise width of cut but it will be obvious), use some pliers to work off the retainers, and put the strips in. Replace the clips. No more leaves.
One cut to fit filter is enough to do about 10 land rovers. Costs about 8 bucks.
Go to Lowes or Home Depot and get a cut to fit filter (blue material, about an inch thick). Cutstrips, strips (I don't remember precise width of cut but it will be obvious), use some pliers to work off the retainers, and put the strips in. Replace the clips. No more leaves.
One cut to fit filter is enough to do about 10 land rovers. Costs about 8 bucks.
The following users liked this post:
JUKE179r (11-26-2016)
Thread
Thread Starter
Forum
Replies
Last Post
Rovernewb15
Discovery II
11
05-12-2016 02:00 AM
Rovernewb15
General Tech Help
3
05-11-2016 02:19 PM