When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
New HD springs on rear to complete 3" lift. Already had the extended HD shocks on it. Added custom fabricated extended stainless brake hoses, and have wheel speed sensor extenders on the way.
Had 2" spacers with stock springs and it was terrible. Doing it right this time. Will do the fronts at the weekend.
Loving the color on this lines man. Where did you get them and price if you don't mind me asking
Jeff,
first off, I love following your build man. It's coming along nicely. On the air tank, have you check out Casey customs out of Oregon? Here is their link Products - Blank Title they sell rock sliders with built in air tanks. Both sliders hold a combined 2.5 gallons of air and then you can mount an high output visit or arb compressor and another 1 gallon tank under the hood by the firewall on the passenger side. Just a thought. On a side note, where did you get your tree limb risers? Keep up the good work man. Making me jealous everytime I see one of your post
Originally Posted by Jeff Blake
Behind on my updates... not all from today:
- Front winch and license plate bracket. Smittybilt x20 10k synthetic
- Mantec snorkel
- mantec rear passenger window guards
- bush cables
- terrafirma wheel arches (meh)
- Greg davis rear bumper. Had this welded up today. Great bumper
- resonator delete. highly recommend (still need to get a proper job done on the piping, I just threw in a 2 foot extension and exhaust tip for now)
Next up I am working on a dual air compressor setup. I want to mount it underneath the truck, but it may be too much work and hassle, and space is really tight. I think the only place to put the tank is where the rear sway bar was, but it's awfully hot up there (directly above exhaust pipes)?
drained the tranny as I had a slight leak at the gasket, button it all back up and seems to be holding
remounted my exhaust as I had the y pipe to muffler too tight and was causing leaks and pulled the exhaust hanger rubber loose
removed most of my dash and console between the seats as I am going to replace the heater core and wanted to get everything out of the way. Next steps is buying a new heater core once I figure out how to get the old one out.
drained the tranny as I had a slight leak at the gasket, button it all back up and seems to be holding
remounted my exhaust as I had the y pipe to muffler too tight and was causing leaks and pulled the exhaust hanger rubber loose
removed most of my dash and console between the seats as I am going to replace the heater core and wanted to get everything out of the way. Next steps is buying a new heater core once I figure out how to get the old one out.