What did you do with your DII today?
#4831
#4832
#4833
The following users liked this post:
Sixpack577 (01-23-2018)
#4835
Brian.
The following users liked this post:
Sixpack577 (01-23-2018)
#4836
No signs of slipped liner on block decks, and no sleeve impressions on bottom of head gaskets anywhere...but you better belive I'm pinning all 8! lol, no way am I tearing it all the way down and not.
I'm curious as to all the bearings's condition now, and I'll probably have time by the weekend to get the engine apart. Cylinders all still have a nice cross hatch pattern too.
Someone has definately been in the engine before, because as suspected, the rear main seal was leaking.
Someone used alot of silicone which bled out the back/flywheel side, and the seal is in crooked, futher in at bottom than top.
Oh well, so far so good.
I really want to get the pistons out, so I can measure the skirts. To see if that's the ticking culprit.
I'll post my results.
#4837
#4838
#4839