4.6 engine build
#51
so front cover buttoned up.
oil pump gear has a beveled edge that points toward front cover.
I greased it full of assembly lube. cam and crank gears have reference marks pointing towards one another.... 6 and 12 o'clock..(or like the creation of adam /see Sistine chapel ceiling) for gaskets, I used gasket shellac on front cover to block (holds in place) and right stuff on the cover side. same with water pump gasket.
oil pump gear has a beveled edge that points toward front cover.
I greased it full of assembly lube. cam and crank gears have reference marks pointing towards one another.... 6 and 12 o'clock..(or like the creation of adam /see Sistine chapel ceiling) for gaskets, I used gasket shellac on front cover to block (holds in place) and right stuff on the cover side. same with water pump gasket.
#52
#53
#54
#55
#56
#57
#58
The following users liked this post:
dusty1 (03-24-2015)
#59
#60