When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
'Slightly' better temps today, but hey when your metaling iron for a living, what's a few degree's.....
She's due for the re-register as well, guess she's worth the 61 bucks and 3 minutes at the court house......thank god there's ZERO inspection in this state.
Awesome thread, love the humor. I picked up my 1998 disco 1 50th aniv 2 years ago for 450.00 on CL. The truck was bumped in the winter in the rear and shut off fuel pump. They stated it needed a new fuel pump. Threw a battery in and pressed the reset button under hood and it drove fine. I was lucky and my disco came from NC, so very little rust, except under passenger foot well. stupid windshield leaked. Your thread was very helpful on certain issues I am having also and made me spit out coffee!!! Keep up the great work, BTW how did the badger run off road ;-)
Heat and humidity has been crap here too and I have a laundry list of stuff to do but when its so hot and humid you can barely breath makes it hard to get motivated to wrench and weld in the sun
Well on the inside its pretty much minty, (even the radio & cd changer works) the rear carpet is stained and the rear door leaks. Don't know if its bent or what. I'm thinking of getting all disco 2 door seals. Then I need to trim the door catch pin channel to go further in for a better seal. I did replace the steering gear box with a junk yard one. 50.00 plus shipping, The best part it was a practically brand new reman unit. SUPER SCORE, no more leaks in steering, now just small oil leaks. The junk yard before that I found brand new plugs and wires all oem sitting on the pass floor of a disco, paid $65.00. I also have to replace the front outer axles seals. Im just going to order both and do both. I kinda have a soft pedal on the brakes when first start up, but then it goes away until you shut off truck. Thinking maybe small leak in brake booster?? what do you think it might be??? I was thinking junk yard and get both booster and master. Also thinking of removing jumps seats and installing non jump seats.
Congrats on the new edition Tom,
I'm spoiled with A/C in my garage. Picked up a hotel ptac unit and installed almost flush with wall. Works awesome, winter time it's good til about 0 degrees, then propane heater comes out. I will be installing a hot dog furnace you hang from ceiling. Was at Menards and they had a sale on led fixtures for 19.99 so I bought 10 of them.
These tail lights on this rig have been an issue since the first day of adoption, that grid crap is from the 70's and I have a busted one now.........Some Johnny Law having a bad day is bound to give me crap over them some day soon.
I'm thinking I might try embedding some different lights from a different rig with normal connections and reliability.......I can do this for less money than any used 'single' fixture out there....with 2 brand new 'other make' fixtures, with out much effort.
Has anyone noticed this done before? If so, do you recall fixtures used?
It might be time to start making this thing mine......