97 Disco HG Repair
#51
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
Danny, I meant coil packs not distributor
And yes I pulled the radiator and made quite a fluid mess.
Here's a video update:
Intake Manifold Removed - YouTube
![Smile](https://landroverforums.com/forum/images/smilies/H5uKDcM.png)
Here's a video update:
Intake Manifold Removed - YouTube
#55
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
clean all that with degreaser and a shop vac so you dont drop **** into the motor. I use a tooth brush and a spatula (metal) carefully. That gross bracket, when i put mine back on after dropping the new valley pan in, i believe you need a fair amount of RTV in the corners where the block meets the heads. the bracket seems to gap a little and i think you're supposed to fill it with RTV. so keep that in mind. But keep your motor covered so you dont drop anything into it, otherwise you'll be tearing the WHOLE thing apart. keep it up.
#56
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
As a general strategy for cleaning the valley and block would you
1. drain oil. fill it up with diesel. scrub it with soft brush.
2. use degreaser and let crud go into engine to be removed later by draining oil
3. spot clean it only
4. something else
I read every thread titled with the word "cleaning" already.
1. drain oil. fill it up with diesel. scrub it with soft brush.
2. use degreaser and let crud go into engine to be removed later by draining oil
3. spot clean it only
4. something else
I read every thread titled with the word "cleaning" already.
#57
#60