Axle Nut Torque Spec for1997 Land Rover Discovery XD
Thread Starter
|
Three Wheeling
Joined: Apr 2008
Posts: 97
Likes: 2
Axle Nut Torque Spec for1997 Land Rover Discovery XD
I am planning to replace the brake rotors on my 1997 Land Rover Discovery XD which requires to remove the hub assembly off the axle.
Does anyone know the torque spec for the axle nut?
Many thanks!
Does anyone know the torque spec for the axle nut?
Many thanks!
TReK
Joined: Mar 2010
Posts: 2,782
Likes: 628
From: NYC
"...
13. Fit hub adjusting nut. Tighten to 61 Nm.
14. Back off adjusting nut 90°. Tighten to 4 Nm.
This will give the required hub end float of
0,010mm
15. Fit a new lock washer.
16. Fit locknut. Tighten to 61 Nm.
17. Tab over lock washer to secure adjusting nut
and locknut."
13. Fit hub adjusting nut. Tighten to 61 Nm.
14. Back off adjusting nut 90°. Tighten to 4 Nm.
This will give the required hub end float of
0,010mm
15. Fit a new lock washer.
16. Fit locknut. Tighten to 61 Nm.
17. Tab over lock washer to secure adjusting nut
and locknut."
Pro Wrench
Joined: Apr 2021
Posts: 1,411
Likes: 397
From: SE Washington State
Another method I learned on-line is to just grab the socket by hand and turn until your hand slips. I tried this and checked with the torque wrench. It ended up in spec. Thank God for YouTube.
Thread
Thread Starter
Forum
Replies
Last Post
