D1 Operating Temperatures
#21
#22
I removed the top hose (drivers side) and the bottom hose and then the small hoses on the top passenger side. I used a Ziploc bag and rubber bands to keep it in.
CLR will not affect the brass in the radiator - I did quite a bit of reading on this prior to doing so. It will affect aluminum...which is why I was very careful on keeping it only in the radiator.
Make sure and run water from all entry|exit points before you refill with coolant & distilled water.
CLR will not affect the brass in the radiator - I did quite a bit of reading on this prior to doing so. It will affect aluminum...which is why I was very careful on keeping it only in the radiator.
Make sure and run water from all entry|exit points before you refill with coolant & distilled water.
#23
#24
#25
Thread
Thread Starter
Forum
Replies
Last Post