Engine check light
#1
#2
Land-Rover P0148 OBD/DLC Error Code - Fuel Delivery Error
Start with the basics, replace the fuel filter and run a big bottle of diesel fuel additive through the tank.
Start with the basics, replace the fuel filter and run a big bottle of diesel fuel additive through the tank.
#3
Generic OBD Error Code Details for P0148
Fuel Delivery Error
What does this mean?
OBD Code P0148refers to
The fuel delivery to the engine is too low under high acceleration.
Symptoms
Possible sumptoms of OBD code P0148
- Engine Light ON (or Service Engine Soon Warning Light)
Causes
Possible causes of OBD code P0148
- Severely restricted fuel filter. - Severely restricted fuel supply line. The Error code is generally activated on detection of the following conditions: The powertrain control module has recognized one bank of the engine is running lean during a heavy acceleration.
Spike, this is a handy site isn't it.
Fuel Delivery Error
What does this mean?
OBD Code P0148refers to
The fuel delivery to the engine is too low under high acceleration.
Symptoms
Possible sumptoms of OBD code P0148
- Engine Light ON (or Service Engine Soon Warning Light)
Causes
Possible causes of OBD code P0148
- Severely restricted fuel filter. - Severely restricted fuel supply line. The Error code is generally activated on detection of the following conditions: The powertrain control module has recognized one bank of the engine is running lean during a heavy acceleration.
Spike, this is a handy site isn't it.
#5
Hey Guys,
a great help as always
I'll get the fuel filter changed today (hopefully) and let you know.
Could it also be anything with the engine stop solenoid? The wiring on that was horrendous, previous owner really screwed it up.....
I replaced the positive feed to the solenoid, and put in a manual cut off switch in the cab.
Jeez, my list of jobs on this thing seems endless....
Darren.
P.s. Happy new year you guys!!! (for tonight).
a great help as always
I'll get the fuel filter changed today (hopefully) and let you know.
Could it also be anything with the engine stop solenoid? The wiring on that was horrendous, previous owner really screwed it up.....
I replaced the positive feed to the solenoid, and put in a manual cut off switch in the cab.
Jeez, my list of jobs on this thing seems endless....
Darren.
P.s. Happy new year you guys!!! (for tonight).
Thread
Thread Starter
Forum
Replies
Last Post
LADEROUTE
Discovery II
3
11-11-2014 10:59 AM
RoverZebra
General Tech Help
2
12-08-2012 04:27 PM
Jeremiahbullrog
Discovery I
7
04-21-2012 06:17 AM
97LANDISCOVERY
Discovery II
3
08-19-2007 04:10 PM