Engine Shot
#22
I am in Mississippi. The truck has OME suspension/springs/steering stabilizer, new bosch alternator, new radiator, new water pump, new valley gasket, new fuel pump, cross drilled rotors and brakes, new power steering pump, new plugs and wires, new headliner, new tie rods, new radiator hoses/reservoir, brand new goodyear armortrac tires, brush guard, piaa 520 lights, window tint, jbl radio/cd with subwoofers installed in factory door panel, new head liner, viper 5902 color screen alarm with remote start. Pretty much everything on there. Prob list for around 6k.
#23
Join Date: Mar 2010
Location: Pittsburgh PA suburbs.
Posts: 5,584
Likes: 0
Received 7 Likes
on
7 Posts
I thought you said it is a 98 with a bad motor? And you expct to get around Six Thousand Dollars for that?
You do realize that things like tinted windows, new headliner, new viper whatever and so forth are worth very little when the motor is bad do you not?
Even if it were pristine and had a new motor that is all you could expect to get for it in my opinion. As is, you would be doing good to get a grand for it.
You do realize that things like tinted windows, new headliner, new viper whatever and so forth are worth very little when the motor is bad do you not?
Even if it were pristine and had a new motor that is all you could expect to get for it in my opinion. As is, you would be doing good to get a grand for it.
#24
#27
Yeah, I am going to list it on CL. My wife just does not want to drive it anymore b/c it keeps having issues..... even though the issues are mostly minor, they take lots of time to figure out. I could always keep it for a project vehicle since it consumes my time. I do kinda enjoy working on it though as it challenges my diagnosing ability along with the fellow LR Forums Members.
#28
Join Date: Mar 2010
Location: Pittsburgh PA suburbs.
Posts: 5,584
Likes: 0
Received 7 Likes
on
7 Posts
Yeah, most of them develop their ow quirks and can be quite the challenge. Not a just jump in and go like some other cars out there.
Since it is an aluminumn block, you do need to be very careful in regard to repeated incidents like you went thru as they will bring o additional problems.
Once you get a handle on them, get the systems serviced and operating properly they will do amazing things if handled correctly.
And then you never want to part with them.
Since it is an aluminumn block, you do need to be very careful in regard to repeated incidents like you went thru as they will bring o additional problems.
Once you get a handle on them, get the systems serviced and operating properly they will do amazing things if handled correctly.
And then you never want to part with them.
Thread
Thread Starter
Forum
Replies
Last Post
Ramathorn
General Tech Help
4
08-26-2007 11:29 AM