I'm using the motor and transmission out of my 1997 landrover discovery 4.0 v8 for a 84 e30 drift project and I would like to simplify the ecu harness as I am on a budget. I was wondering if there is someone out there that would know or have a picture of only the nessesary the wires coming out of the ecu to have the motor run, I have all the time to do this prosses, thank you any help is much appreciated

 

Honestly the ECU loom is already pared down to the essentials, because that is all it does, runs the motor. There isn't a BCU tied in. You could off the emissions like purge and post cat O2s and same with the alarm tie ins.... It's a very spartan unit to start with.......