Cant find std size rod bearings
Camel Trophy
Joined: Nov 2015
Posts: 3,560
Likes: 834
From: Staten Island, NY
I think these are the ones i installed in my engine a couple of weeks ago:
https://lucky8llc.com/collections/di...ederal-mogul-2
https://lucky8llc.com/collections/di...ederal-mogul-2
TReK
Joined: Jul 2017
Posts: 3,387
Likes: 488
You Need to measure the crank journals first.
The journals should be stock diameter, which means you need stock size bearings.
Oversize bearings will Not fit a stock crank, as the oversize bearings are thicker to compensate for the worn material the lathe cut off the crank...which would then require thicker bearings.
You only need oversize bearings if the crank journals are worn and have been/need to be machined/turned to a smaller I.D to smooth the journal surfaces.
The journals should be stock diameter, which means you need stock size bearings.
Oversize bearings will Not fit a stock crank, as the oversize bearings are thicker to compensate for the worn material the lathe cut off the crank...which would then require thicker bearings.
You only need oversize bearings if the crank journals are worn and have been/need to be machined/turned to a smaller I.D to smooth the journal surfaces.
Thread
Thread Starter
Forum
Replies
Last Post
