A couple tech questions: Brake pulsating and exhaust gaskets
#11
I ran a 2" lift (shocks and coils) with OEM brake lines for a year with hard core wheeling and disconnected sway bars. I wouldn't recommend it until you replace the lies with longer ones, but you're fine.
Also the exhaust bolts. Just tighten them. If you are lucky enough to still have the studs it should be easy. Mine broke off so I drills out the holes and installed through bolts.
Also the exhaust bolts. Just tighten them. If you are lucky enough to still have the studs it should be easy. Mine broke off so I drills out the holes and installed through bolts.
#12
I ran a 2" lift (shocks and coils) with OEM brake lines for a year with hard core wheeling and disconnected sway bars. I wouldn't recommend it until you replace the lies with longer ones, but you're fine.
Also the exhaust bolts. Just tighten them. If you are lucky enough to still have the studs it should be easy. Mine broke off so I drills out the holes and installed through bolts.
Also the exhaust bolts. Just tighten them. If you are lucky enough to still have the studs it should be easy. Mine broke off so I drills out the holes and installed through bolts.
Thread
Thread Starter
Forum
Replies
Last Post
TRIARII
Discovery II
16
09-20-2014 07:31 PM
Foe
Discovery II
7
08-03-2009 05:05 PM