I am re-installing my new coil-packs and plug wires (still). I can get the wires on the driver side to not cross too much but the passenger side is a bit of a mess.
Is it important to not have them cross?
I believe they are 9mm wires so they should be well insulated.

 

To be clear, I mean wires that are going to the correct cylinder but overlapping each other on the way.

 

I was about to be like... Uhm Yea. But no that should be fine unless your wires are worn and the insulation is broken down.

 

Okay cool, brand new super thick wires so I should be good, thanks