discovery 2 lug thread size
#3
#4
The following users liked this post:
Sandman614 (11-26-2020)
#5
@LRDISCO DO NOT buy cheap ones, the keys tend to fail and no tow truck carries a locking nut breaker for our size of lug nuts. I have seen 3 of those cheap locking hub keys fail.
Buy a good quality one ,or you may come to regret it, the guy in the jeep did 150.00 service call to a forest service road. Nothing we could do to help him other than make coffee and wait with him.
Buy a good quality one ,or you may come to regret it, the guy in the jeep did 150.00 service call to a forest service road. Nothing we could do to help him other than make coffee and wait with him.
#6
The following 2 users liked this post by Dave03S:
JUKE179r (11-27-2020),
Richard Gallant (11-26-2020)
#9
@Dave03S man I did not notice the date of the original post
On a different note but lug nut related. Off roading years ago one LR owner ( a D2) had a torn sidewall with one seized lug nut now sporting rounded off corners.
Told they got the other four off after a long struggle before we arrived.
Removed two batteries from other vehicles, connected jumper cables installed their now POS socket over the now POS lug nut.
Down the center with 1/8" 6013 welding rod leftover from a welding job did a rosette weld.
With the socket and lug nut now as one plus heat it was an easy lugremoval and spare install with a modified SK socket I carry besides the crappy LR socket.
.......~~=o&o>.....
Thread
Thread Starter
Forum
Replies
Last Post