Front Bumper
#3
It's going to cost about that much for shipping alone if you check the Ebay listings. I recommend you find some junkyards close to you and see if they have some Discovery 2s on the yard or wait a while til some pop up. Unless you can get a killer deal on one from someone on here or near where you live. Beyond that I recommend getting the cheap steel bumpers that everyone gets, it will run you a little over 500.
The bumpers are known for breaking easily as the plastics are very brittle on these vehicles. For whatever reason the rear bumpers are broken 80% of the time on the ones I see and the fronts are still good, but it can go either way. I consider myself extremely lucky that I found a pristine rear one at a junkyard one day and paid maybe a 10th of the cost as finding one online, but I would love to have steel bumpers front and back.
The bumpers are known for breaking easily as the plastics are very brittle on these vehicles. For whatever reason the rear bumpers are broken 80% of the time on the ones I see and the fronts are still good, but it can go either way. I consider myself extremely lucky that I found a pristine rear one at a junkyard one day and paid maybe a 10th of the cost as finding one online, but I would love to have steel bumpers front and back.
#4
I have one that I am planning to remove to install a steel bumper with winch. It does have a small crack on the top covered with some tape right now. I have been too busy working on other things to get to that but if you are interested let me know. It is on an 02 and bumper is black. I would take a better picture but the rover is not with me right now. Also I can't tell if yours is fitted with the fog lamps as the one that I have is.
The following 2 users liked this post by craiglud:
Andrew_Parada (04-19-2020),
Isaiahclark (04-20-2020)
#5
I have one that I am planning to remove to install a steel bumper with winch. It does have a small crack on the top covered with some tape right now. I have been too busy working on other things to get to that but if you are interested let me know. It is on an 02 and bumper is black. I would take a better picture but the rover is not with me right now. Also I can't tell if yours is fitted with the fog lamps as the one that I have is.
#6
I have one that I am planning to remove to install a steel bumper with winch. It does have a small crack on the top covered with some tape right now. I have been too busy working on other things to get to that but if you are interested let me know. It is on an 02 and bumper is black. I would take a better picture but the rover is not with me right now. Also I can't tell if yours is fitted with the fog lamps as the one that I have is.
#7
#8
@Andrew_Parada I sent you a message. I do think shipping on this is going to be a problem but who knows.
The following users liked this post:
Andrew_Parada (04-20-2020)
Thread
Thread Starter
Forum
Replies
Last Post
_ExpeditionMan
Discovery I
2
04-19-2020 09:33 PM
spence426
Retired - Private 'Wanted' Classifieds
2
10-25-2007 10:43 PM