How do i pop the hood when the cable is broken?
#11
There is no easy way, there is big plastic anti theft cover protecting the release cable. It is hard to get at it I had to use a cordless drill and very long wood bit to drill a couple of holes in the cover to finally get to a point where I could shove the latch. Took me a couple hours, but I was avoiding doing any additional damage
#12
The following users liked this post:
JohnZo (01-06-2022)
#14
On a 94-02 D1/D2 remove the drivers side headlight and the hood release cable is right behind it. You can then cut the cable, peed back the outer bit, and simply pull on the cable with a pair of locking plyers. 03-04 D2 is a bit more tricky due to the 1 piece headlight and the light itself being bolted in.
The following users liked this post:
JohnZo (01-06-2022)
The following users liked this post:
JohnZo (01-06-2022)
#16
The following users liked this post:
Richard Gallant (01-07-2022)
Thread
Thread Starter
Forum
Replies
Last Post
steveo2000
Discovery II
12
09-08-2015 08:00 AM