How to replace your ignition coils and wires with photos!
#21
Here I wrote an article on how to remove the ignition wires and coils with pics, and step by step so you can't mess it up.
here is the link: Land Rover Help!: Land Rover Discovery 2 Ignition Wires, Coils and Spark plug replacement (How to)
here is the link: Land Rover Help!: Land Rover Discovery 2 Ignition Wires, Coils and Spark plug replacement (How to)
#22
The following users liked this post:
Marggo (06-03-2023)
#23
Thank you! I eventually got it out. The plenum gasket seems warped so I’m going to replace that as well. It seems like someone tried doing some engine work before and did not put things back together. Bolts were missing and the holding bracket was not aligned
One more question.. if I have a secondary air intake, can I (or am I supposed to) remove those metal lines between the bracket and ac lines? I can’t reach the wires otherwise.
(Please bear with me if these seem like no brainer questions. I am a complete newbie who got thrown into trying to pretty much replace this whole engine by myself with only YouTube and forums with you saints to guide me)
One more question.. if I have a secondary air intake, can I (or am I supposed to) remove those metal lines between the bracket and ac lines? I can’t reach the wires otherwise.
(Please bear with me if these seem like no brainer questions. I am a complete newbie who got thrown into trying to pretty much replace this whole engine by myself with only YouTube and forums with you saints to guide me)
#24
#25
I can see a gasket in that red circled area. No need to mess with that, it never leaks.
Go ahead and remove the stainless tubing, almost impossible to get those wires out with it in there.
You might be interested in this: https://extinctmotorsports.com/the-e...g-perspective/
Go ahead and remove the stainless tubing, almost impossible to get those wires out with it in there.
You might be interested in this: https://extinctmotorsports.com/the-e...g-perspective/
The following users liked this post:
Alex_M (06-03-2023)
Thread
Thread Starter
Forum
Replies
Last Post