I know, I know, another 3 amigos post. But I really need your guys help.
#21
I'm confused. Have you cut the wires connected to those pins? Looks like they're out of the truck.
If not, or even if you have, use your multimeter to check continuity and resistance roundtrip to and from the sensor. According to the RAVE (p.877) resistance should be 950-1100 ohms. That's what the SLABS is looking for.
If not, or even if you have, use your multimeter to check continuity and resistance roundtrip to and from the sensor. According to the RAVE (p.877) resistance should be 950-1100 ohms. That's what the SLABS is looking for.
Regardless, just drove around after the repair and still getting the same code.
Although, just noticed this... my ultra gauge just spits out a 1590 code, but the nanocom lists 1592.
#23
#24
#25
Interesting development... after exhausting seemingly every remedy related to this wheel, I decided to just check wheel bearing for slop... even though they're brand new. And lo-and-behold. The wheel bearing was super clunky and had a ton of play in all directions. What the heck? This things was brand new! For reference, it was this one from Lucky8 >>> https://lucky8llc.com/collections/di...ly-with-sensor
The left-hand side is also new and the same hub, and there's no slop. I reordered the same one hoping the one I got was a dud. What a pain though. Gosh. I've wasted SO much money on ABS sensors and even more time on troubleshooting. I hate this.
The left-hand side is also new and the same hub, and there's no slop. I reordered the same one hoping the one I got was a dud. What a pain though. Gosh. I've wasted SO much money on ABS sensors and even more time on troubleshooting. I hate this.
#26
#27
I know a lot of folks on here swear by the cheap wheel bearings but IMHO it’s best to get a brand name part for such a critical part. Timken is hands down the best but pricey. I ended up with Moog bearings as Timken where out of stock everywhere I looked. I know Moog’s quality is not was it used to be but they do have a 3 year warranty which is something. @Brandon318 i hope the new bearing fixes your issue.
#28
Thread
Thread Starter
Forum
Replies
Last Post
Brandon318
Discovery II
16
01-12-2022 07:54 PM
austinlandroverbill
Discovery II
20
02-25-2017 07:21 AM