Installing a Temp Gauge on a 2003 Disco II
#21
#25
Yeah, bend over
Sorry, just kidding. I have been thinking of replacing the T with something that is drilled and tapped to take the 1/4 probe and do away with the bleed screw, or have 2 tapped holes to accommodate both.
Another option is to do what the Mustang guys do, drill and tap the intake manifold in the same area where the stock sensor is. I looked at mine when it was off and there is an ideal spot with a flat surface. It takes some commitment though.
Sorry, just kidding. I have been thinking of replacing the T with something that is drilled and tapped to take the 1/4 probe and do away with the bleed screw, or have 2 tapped holes to accommodate both.
Another option is to do what the Mustang guys do, drill and tap the intake manifold in the same area where the stock sensor is. I looked at mine when it was off and there is an ideal spot with a flat surface. It takes some commitment though.
#26
#30
I'm planning on hooking up my sending units tonight, was it determined whether or not this drain plug is an acceptable place for the temp-sensor?