I just replaced the driver’s side actuator and replaced the exterior handle door lock cylinder and got everything bolted back together. Everything worked great testing the function while the door panel was off and again when the panel was put back on. Quick note: I have superlock and the anti-theft system turned off in the BCU. I rarely use the door locks at all. This morning on my way to work I tested the power locks a few times. When I got to work The interior door handle wouldn’t open the door. I could roll the window down and open from the outside no problem. I tested the power locks a few more times and about a third of the time the interior door handle wouldn’t function properly. I have searched the forum a bit and couldn’t find an answer to whether the interior door handle cable could be adjusted. I thought I would throw it to y’all for input before I pulled the panel to check myself. Any ideas?