New (and hopefully final) engine build.
#11
#12
#13
Been cleaning her up a bit since she’s been down.
New OME medium duty springs and Bilsteins all around. New shock towers and isolators too.
I had the steering box rebuilt by Straight Line Steering in San Jose. Cleaned out the PS reservoir and got new PS lines. New steering and drag links. Also replaced the panhard rod and Watts linkage bushings.
Also have a spare set of radius arms at a local shop getting re-bushed.
Oh, and lots of cleaning and "rattlecan restoration"...
New OME medium duty springs and Bilsteins all around. New shock towers and isolators too.
I had the steering box rebuilt by Straight Line Steering in San Jose. Cleaned out the PS reservoir and got new PS lines. New steering and drag links. Also replaced the panhard rod and Watts linkage bushings.
Also have a spare set of radius arms at a local shop getting re-bushed.
Oh, and lots of cleaning and "rattlecan restoration"...
Last edited by Tony Luna; 04-14-2023 at 08:05 PM.
#16
#17
I recommend vapor blasting to make it easier. Leaves a nice satin finish. Just got to make sure that the runners aren't gunked up, otherwise the media used embeds itself into the sludge and now you have to take the time to scrub it all out.
#19
#20
Back on track!!!
After much pondering and debate, I finally chose a route forward on how to fix the stripped head stud threads in the block. Details in different post - https://landroverforums.com/forum/di...hreads-116743/
Got both heads installed with a nice solid feel on the last round of torque (70 ft/lbs).
Got the exhaust manifolds painted and cured during the wait…
After much pondering and debate, I finally chose a route forward on how to fix the stripped head stud threads in the block. Details in different post - https://landroverforums.com/forum/di...hreads-116743/
Got both heads installed with a nice solid feel on the last round of torque (70 ft/lbs).
Got the exhaust manifolds painted and cured during the wait…
Last edited by Tony Luna; 04-24-2023 at 02:40 PM.
The following 3 users liked this post by Tony Luna: