Obd port problem

Reply Subscribe

Thread Tools

Search this Thread

01-27-2016 | 08:11 PM

sickws6

Thread Starter

Rock Crawling

Joined: Sep 2011

Posts: 330

Likes: 21

Obd port problem

So never had problems connecting my scanner now it won't connect. I wiggle it a little to briefly get power to scanner but then it still won't connect. Any suggestions?

Reply Like

01-27-2016 | 08:34 PM

dgi 07

Pro Wrench

Joined: Feb 2011

Posts: 1,570

Likes: 99

From: People's Republic of New Jersey.

Check the pins. Probably spread to far.

Reply Like

01-27-2016 | 09:24 PM

Alex_M

Camel Trophy

Joined: Aug 2014

Posts: 4,734

Likes: 971

From: Southwestern Virginia

Yep. If that doesn't clear it up then try spraying some electrical parts cleaner. Might be some corrosion that needs cleaning out.

Reply Like

01-28-2016 | 08:32 AM

sickws6

Thread Starter

Rock Crawling

Joined: Sep 2011

Posts: 330

Likes: 21

What do I need to do if the pins are spread out? Just straighten them or something.

Reply Like

01-28-2016 | 09:35 AM

dgi 07

Pro Wrench

Joined: Feb 2011

Posts: 1,570

Likes: 99

From: People's Republic of New Jersey.

Quote:

Originally Posted by sickws6

What do I need to do if the pins are spread out? Just straighten them or something.

Opposite actually. The pins on the OBD2 port are female. They need to be pushed back together. A long thin pick may work, or a pin terminal tool may work better.

Attached Thumbnails