An open letter to the board...
#1
An open letter to the board...
Guys,
I just wanted to say thanks to all of you who contribute here on a regular basis... I have just completed the dreaded head gasket job (Though now not so dreaded).. I didn't have ask one single question because they had all been asked and answered on here.. It was much appreciated and made the job a whole lot easier..
had a compression leak on the passenger side (and drivers it turns out) Pulled the heads and took them to the machine shop...both were warped.. had them milled and a valve job done. I went with the A/B kit with their studs..
No surprises.... And she runs like a top now.... Ill throw couple of pics on here during and after.....But mainly I wanted to thank all of you. So Thanks
Agnes Slideshow by jimpty | Photobucket
I just wanted to say thanks to all of you who contribute here on a regular basis... I have just completed the dreaded head gasket job (Though now not so dreaded).. I didn't have ask one single question because they had all been asked and answered on here.. It was much appreciated and made the job a whole lot easier..
had a compression leak on the passenger side (and drivers it turns out) Pulled the heads and took them to the machine shop...both were warped.. had them milled and a valve job done. I went with the A/B kit with their studs..
No surprises.... And she runs like a top now.... Ill throw couple of pics on here during and after.....But mainly I wanted to thank all of you. So Thanks
Agnes Slideshow by jimpty | Photobucket
Thread
Thread Starter
Forum
Replies
Last Post
marlymarl
General Tech Help
2
07-28-2005 12:23 AM